Push-Button self-grounding spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female. If needed, see part# 03199C for a short adapter wire that converts flat female s to female round. Secondary connector is a flat male used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article.Replaces Coleman factory part# 4153714Part Number: 03120Weight: 0.1.
Chrome steel bottom warming rack for Charbroil 8000 series U-burner grills. Was used with top rack 06449 that is no longer available.Warning:No longer made to work with upper warming rack. Does not have eyelet holes on right and left sides of warming rack to support the upper warming rack.TEMPORARILY OUT OF STOCK. Orders for this part will be filled from new inventory arriving early January.Replaces Coleman factory part# 4152125Part Number: 02125Dimensions: 26 1/4” x 10 1/2”Material: chrome steel wireWeight: 1.14.
The lanterns we'll be working here are very common Coleman® Model 220: one a 1950 Nickel Plated 220D and the other a newer 220E from the early 1960s. Nearly all vintage double mantle lanterns are identical, except for very old Quick Lite lanterns. Pages for the older ones will come soon as they are quite a bit easier.So what happens if you get stuck? I recommend the at oldcolemanparts.com. The wise and experienced collectors who frequent that site are always happy to assist someone in need, usually within an hour or so after posting.Before you start you should decide how much of a rebuild you are going to do. If the lantern has not been used in many years and/or is obviously worn out (look for black varnish around the fuel cap or valve stem) then I recommend you tear it apart for a full rebuild.
Coleman
If in near-new or well maintained condition then you may be able to get away with a low-level rebuild.The parts required for a low-level rebuild are available at most good sporting goods stores and on-line. If you need, or wish, to completely tear down the lantern you will need parts not so readily available. Again is a good source for parts and has everything you will need.And one last thing- please review the before starting.